PRO 3.3 COMPLETE TRIGGER KIT FOR GLOCK® GEN 1-5

GHOST INC

MSRP: $49.95
Sale: $27.95
(No reviews yet) Write a Review
UPC:
813978020778

PROTK - PRO 3.3 COMPLETE KIT Gen 1-5

PRO 3.3LB Trigger Connector and Spring Kit for Glock GEN 1-5

Fits ALL Glock Models (Except Glock 42 & 43)

This is the connector long sought after by Glock Enthusiast everywhere. This is the Lightest Smoothest Connector on the market today 3.3 lb. angled connector.

Lightest Stage Free Trigger

  • Smoother Than any other Trigger
  • Shorter Pull Eliminates Over Travel
  • Perfect Function
  • Fits GEN 1-5
  • Complete Spring Kit Included- Trigger spring is not used on Gen5 Pistols
  • Ghost Lifetime Guarantee
  • Minor Fitting Required

The GHOST PRO 3.3 is the best self-defense & Target trigger control connector Ghost makes!

The PRO 3.3 is Smoother, Lighter, Shorter and eliminates trigger Over-travel! These attributes give you the fastest most accurate first shot hit advantage of any self-defense Glock style trigger.

HIT FIRST & FAST WITH THE PRO 3.3

The PRO 3.3 fixes the Glock bump or glitch, this is the pre-travel resistance you feel and must overcome when the trigger bar bumps into the connector. This bump causes you to apply excessive force and will move the pistol off target. Another thing the PRO 3.3 corrects is trigger over-travel; the excessive movement of the trigger after the pistol fires. Over-travel causes the pistol to move off of alignment with the target, making your shot go low and to one side.

PRO 3.3 KEEPS YOU ON TARGET

The PRO 3.3 is the best self-defense connector made and by changing a few springs you can also have the best sport trigger connector! Ghost Inc. believes that this trigger control connector makes all others obsolete. Once you try it, they know you will agree! Minor fitting required.

Ghost Complete Trigger Spring Kit

This is a complete drop in trigger kit is designed to help you fine tune and improve your trigger pull, and function in competition pistols, and for Self defense Carry or Hunting pistols.

Included in the kit are 4 Drop in Springs:

  • 4lb Reduced Power Striker Spring- Should only be used for a strictly target or competition set up.
  • 6lb Extra Power Striker Spring- Use this to increase the strike power and makes for a faster reset.
  • Reduced Power Safety Block Plunger Spring- Smooth out the bump as the safety plunger is engaged.
  • 6lb Extra Power Trigger Spring (Extra power reduces the pull weight)- This heavier weight offsets the added weight of the striker. This is an assisting spring and lightens up the trigger press. This spring is not used on GEN 5 pistols

The Ghost Complete Drop in Spring Kit gives your Glock a smooth, crisp, lightened Trigger pull that helps promote consistent, match-grade accuracy. You can change specific springs to improve a particular aspect of the trigger pull, or do a complete upgrade.

Accurately calibrated spring weights deliver consistent force through the entire compression and release cycle to give you a light, refined trigger pull without sacrificing the reliability of your pistols Safe Action system. Trigger Spring has nearly 30% more power than factory spring, which actually reduces pull by as much as 1 lb. for improved control. This produces faster trigger reset for quicker follow up shots. Reduced power Safety Spring reduces friction caused by the firing pin safety, further smoothing the pull. Striker Spring is designed for improved consistency and durability over factory spring.

You can choose the Competition Lighter Striker Spring or the Heavier Self Defense Striker spring.

This Connector is For Competition and or CCW Self-Defense.

Recommended: A gunsmith or armorer should install this connector.

NOTE : THIS IS NOT A DROP IN TRIGGER CONNECTOR MINOR FITTING IS REQUIRED

Please Note: The 4.0 lb Firing Pin Spring may cause light primer strikes in some pistols and this is the Target/Sport configuration. For Self Defense or in a 10mm/45 caliber GLOCK we recommend the 6.0 lb firing pin spring or keep stock firing pin spring and use the 6lb. trigger spring and the reduced power safety plunger spring.

 

Glock® is a Registered Trademark of Glock Inc.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

Manufacturer Part Number:
GHO_PRO_KIT
Sub Category:
Connectors
Firearm Make:
Glock
Model:
17
Model:
17L
Model:
18
Model:
19
Model:
19X
Model:
20
Model:
20SF
Model:
21
Model:
21SF
Model:
22
Model:
23
Model:
24
Model:
25
Model:
26
Model:
27
Model:
28
Model:
29
Model:
29SF
Model:
30
Model:
30S
Model:
30SF
Model:
31
Model:
32
Model:
33
Model:
34
Model:
35
Model:
36
Model:
37
Model:
38
Model:
39
Model:
40
Model:
41
Model:
44
Model:
45
Model:
47
Model:
Gen 1
Model:
Gen 2
Model:
Gen 3
Model:
Gen 4
Model:
Gen 5
Trigger Pull:
3.3 LB
Made in the USA:
Yes

Related Products